|
|
| |
Fibre Channel to cPCI Host Bus Adapters (2GB)
QCP2340: Dual Port, Fiber Optics, 64-bit, Standard cPCI 66Mhz
Designed as the optimum choice for Sun Microsystems Sun Fire . servers, the SANblade QCP2342 offer customers nondisruptive expansion of their storage area network (SAN) with full support of cPCI hot swap functionality.
Delivering industrial strength performance, these 2-Gb Fibre Channel to 64-bit, 66-MHz CompactPCI (cPCI) HBAs incorporate a robust mechanical design with high compute density. These multimode optic HBAs are specifically designed or physically demanding environments that require serviceability and availability.
The QCP2340 is the right solution for mid-range and enterprise-level server manufacturers implementing cPCI in mission critical environments requiring single port, 2-Gb cPCI. If you want to maximize connectivity and optimize port density, the QCP2342, a dual channel version of the QCP2340, is the
perfect fit.
Features
- Unique, single-integrated Fibre Channel controller for added reliability and optimum performance
- Autonegotiation of Fibre Channel speed bit rate (1 Gb or 2 Gb)
- Automatic topology detection
- Concurrent support for SCSI and IP protocols
- Simultaneous initiator and target mode support
- Easy detection of activities through an LED panel:
- Power
- Online
- Signal acquired
- Loss of synchronization
- Firmware error
- HBA and LUN level failover
- Persistent binding
- LUN masking
- Local and remote management
- Load balancing for optimized performance
- Diagnostics
- Loop back test
- Read/write buffer tests
Technical Specifications
| Host Bus Interface Specifications |
| Speed |
64-bit, 66-MHz SBus |
| Voltage |
3.3 V and 5.0 V buses supported |
| Compliance |
PICMG 2.0 CompactPCI Specification rev. 3.0, PICMG 2.1 Compact PCI (cPCI) Hot Swap Specification rev. 1.0, PCI Bus Power Management Interface Specification rev. 1.1 |
| |
| Fibre Channel Specifications |
| Speed |
200 MBps maximum at half-duplex, 400 MBps maximum at full-duplex |
| Compliance |
Second Generation FC Generic Services Definition (FC-GS-2), Third Generation FC Generic Services Definition (FC-GS-3), Fibre Channel-Physical and Signaling
Interface (FC-PH), SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre Channel-Arbitrated Loop-2 (FC-AL-2), Fibre Channel-Private Loop Direct Attach Technical
Report (FC-PLDA), RFC 2625 IP and APR Over Fibre Channel, Fibre Channel Framing and Signaling (FC-FS) |
| Topology |
FC-AL, FC-AL-2, point to point, switched fabric (FL_Port and F_Port) |
| Class of service |
Class 3 Fibre Channel service |
| Protocol |
SCSI-FCP, IP, FC-TAPE |
| Buffer credits |
For 512-byte frame size, 9 credits issued. For 2K-byte frame size, 3 credits issued. |
| |
| HBA Physical Specifications |
| Ports |
Two |
| Media |
Multimode optic |
| Options |
Short wave laser |
| Form factor |
CompactPCI: 16.0cm × 10.0cm (6.3" × 3.9") |
| Bracket size |
Standard size |
| Connectors |
LC-style connector that supports non-OFC, multimode fibre optic cabling using a small form factor optical transceiver module |
| Power consumption |
~ 5.0 watts |
| |
| HBA Environment |
| Airflow |
0 lf/m |
| Temperature |
Operating: 0 °C/32 °F to 55 °C/131 °F. Storage: –20 °C/–4 °F to 70 °C/158 °F |
| Humidity |
Relative (noncondensing): 10% to 90%, Storage: 5% to 95% |
| Distance |
1 Gbps: 500 meters 50/125 µm fiber, 300 meters 62.5/125 µm fiber
2 Gbps: 300 meters 50/125 µm fiber, 150 meters 62.5/125 µm fiber |
| Cable |
50/125 µm multimode fiber, 62.5/125 µm multimode fiber |
| |
| |
Agency Approvals—Product Safety |
Agency Approvals—EMI and EMC |
| US/ Canada |
UL, cUL
UL60950
CSA C22.2 No.60950
Class 1 Laser Product per DHHS 21CFR (J) |
US FCC Part 15, Class B |
| Europe |
73/23/ECC Low Voltage Directive:
TUV: EN60950: 1992+A1,2,3,4,11
EN60825-1: 1994+A11
EN60825-2: 1994
|
| Canada | Industry Canada ICES-003, Class B |
| Europe | 89/336/EEC EMC Directive CE Mark:
EN55022: 1995 Class B
EN55024: 1998
EN61000-3-2:1995
EN61000-3-3:1994 |
| Japan | VCCI, Class B |
| Taiwan | CNS 13438 Class B |
| Mew Zealand | AS/NZS 3548 Class B |
| Australia/Korea | MIC |
|
| |
| Software |
| SANblade Manager |
Easy to use, Java-based, configuration, diagnostics and analysis HBA management application for heterogeneous SAN management across multiple hosts. Includes failover, LUN masking, and persistent binding capabilities. |
| SANblade Control FX |
Wizard-based utility provided for installation, configuration, persistent binding, and diagnostic functions on the local host. |
| Operating System Drivers |
Solaris SPARC |
| Flash utilities |
Configuration utility resident with FCode |
| Boot support |
Solaris SPARC: FCode |
|
|
|
|
|